Liquid Level is the online shopping store division of Innovative Components which has developed the essential and high quality float gauge sensor level equipment designed to add value to customer's products and to meet the varied and broad range of needs for customers' businesses. The float gauge sensor level equipment is used for the precise measurement of bulk liquid in tanks and other large liquid containers. Liquid Level through Innovative Components warrants its products to be free from defects in its materials and workmanship under normal use and service for twelve months from date of shipping the order.

Liquid Level supplies float gauge sensor level equipment to a wide variety of industries worldwide. Float gauge sensor level equipment is typically found in storage vessels to enable the controlling of pumps and valves and the high/low level alarm conditions. The vital level indicators are also used for continuous or multi-point monitoring in such industries as beverage processing and storage plants, chemical processing and storage facilities, and diesel fuel and oil level containers. Liquid Level also supplies equipment to food and dairy processing establishments which require the float gauge level indicator equipment as do marine facilities, oil and water separators, waste oil, and grease recovery equipment. Power generators require float gauge sensor level equipment and even commercial dishwashers employ the small and innovative piece of equipment.

Liquid Level supplies sound and durable electrical float gauge sensor level equipment and these specific sensors give point to point or continuous readings and are ideal for the full to empty readings of tanks, drums, or large container monitoring. These standard two inch NPT tank float gauge sensor level equipment items are fabricated to length from brass, stainless steel or polypropylene and are used in applications where continuous level indication information is required. CLMs come in one quarter inch resolution and are constructed from 316 stainless steel, brass, buna, or polypropylene. This three wire potentiometer requires a signal conditioner or digital panel meter for a 4-20ma output. The CLM is the logical and economical choice when multi-level switches will not do. Standard units are available from Liquid Level in up to an eight foot length.

One of the most frequent questions posed to Liquid Level is how safe are the electrical float gauge sensor level equipment items. "Intrinsically safe" equipment is defined as equipment and wiring which is incapable of releasing sufficient electrical or thermal energy under normal or abnormal conditions to cause ignition of a specific hazardous atmospheric mixture in its most easily ignited concentration. This is accomplished by limiting the amount of power available to the electrical equipment in the hazardous area to a level below that which will ignite gases. The electrical float gauge sensor level equipment meets all the criteria for safety.

Liquid Level's mechanical float gauge sensor level equipment uses a tape measure and magnetic interlock to take a tank level reading. These non-electrical tank level indicators are most suitable for mechanical indication of tanks and drums. The standard two inch NPT tank float gauges are made to length from brass, stainless steel and polypropylene and like all Liquid Level's products, are solid, durable, and affordable.